1. CNC turning parts are easy to ensure the positional accuracy of each machining surface of the workpiece.
(1) For example, it is easy to ensure the coaxiality requirements;
Use the chuck to install the workpiece, and the rotation axis is the rotation axis of the main shaft of the lathe;
Use the front and rear tops to install the workpiece, and the rotation axis is the center line of the two tops;
(2) It is easy to ensure the perpendicularity between the end face and the axis, and the perpendicularity between the horizontal slide rail and the axis of rotation of the workpiece is required.
2. The cutting process of CNC turning parts is relatively stable, avoiding inertial force and impact force, allowing a larger cutting amount and high-speed cutting, which is conducive to improving productivity.
3. CNC turning parts are suitable for the finishing of non-ferrous metal parts.
When the surface roughness of non-ferrous metal parts is large and the Ra value is small, it is not suitable to use grinding, but turning or milling is required. High quality can be achieved when fine turning with diamond turning tools.
4. The tool is simple.
The turning tool is easy to manufacture, sharpen and install.
