Non-ferrous metal cutting fluid in the process of processing and common metal cutting fluid use has many different places, we have to pay attention to a lot of problems in the processing and use.
First, according to the different categories of metal to select the cutting fluid to meet the requirements.Non-ferrous metal processing and our general processing is not the same, there are some metal chemical properties are special, the process of the temperature and pressure requirements are also different, so we want to choose according to different categories of non-ferrous metal cutting fluid.
Second, non-ferrous metal cutting fluid when using cannot be used with other cutting fluid or mixed use, in order to improve the performance of the cutting fluid, a lot of cutting fluid will add some chemical additives, but if the cutting fluid mixing, chemical reaction happened if the chemical reagent, and it might damage the machining processing machinery.
Three, after the use of non-ferrous metal cutting fluid we should pay attention to seal, to prevent the cutting fluid volatilization, or in the cutting fluid mixed with impurities, leading to the deterioration of the cutting fluid, affecting the normal use.
Four, if the cutting fluid stratification or turbidity phenomenon, to check the specific cause of turbidity, if the non-deterioration, can be used by shaking down.